High Performance Diode Lasers
All lasers operate in a single transverse mode. Accessories such as beam expanders, various optics, should be ordered at the same time. See the "Accessories" section.
|
Model No. (no temperature control) |
Model No. (with Temperature Control) |
Wavelength (nm) |
Output Power (mW) |
Mode (long.) |
|
| L4 375M-15-TE/OSYS | |||||
| L4 405M-20/OSYS | L4 405M-20-TE/OSYS |
|
|
|
Lower cost 405nm
laser Excellent beam quality for confocal microscopes, microlithography, reprographics, flow cytometry, direct write systems, material analysis |
| L4 405M-50/OSYS | L4 405M-50-TE/OSYS |
|
|
|
|
|
|
L4 405M-95-TE/OSYS |
|
|
|
|
| . | L4 405N-9-TE/OSYS |
|
|
|
|
| L4 405N-32-TE/OSYS |
|
|
|
||
|
|
L4 445M-40-TE/OSYS |
|
|
|
|
|
|
L4 473M-15-TE/OSYS |
|
|
|
|
|
|
L4 488M-48-TE/OSYS |
|
|
|
|
| L4 515-20-TE/OSYS |
|
|
|
||
| L4 635S-4/OSYS | L4 635S-4-TE/OSYS | 635 +/-5 | 4 | S |
Low noise, excellent
beam quality. High power HeNe replacement. Fluorescence excitation and general purpose use. |
| L4 638S-12/OSYS | L4 635S-12-TE/OSYS | 637 +/-4 | 12 | S | |
| L4 638S-25/OSYS | L4 638S-25-TE/OSYS | 638 +/-4 | 25 | S | |
| L4 642S-48/OSYS | L4 642S-48-TE/OYS |
|
|
|
|
|
|
L4 642S-64-TE/OSYS |
|
|
|
|
|
|
L4 642S-120-TE/OSYS |
|
|
|
|
|
|
L4 660N-32-TE/OSYS |
|
|
|
Raman source |
| L4 660S-40/OSYS* | L4 660S-40-TE/OSYS* | 659 +/-5 | 40 | S |
High power HeNe replacement Raman source |
|
|
L4 660S-95-TE/OSYS* |
|
|
|
|
| L4 670S-8/OSYS | L4 670S-8-TE/OSYS | 670 +/-10 | 8 | S | |
| L4 685S-40/OSYS | L4 685S-40-TE/OSYS | 685 +/-10 | 40 | S | |
| L4 705S-32/OSYS | L4 705S-32-TE/OSYS |
|
|
|
Greater penetration of living tissue. Low absorption by hemoglobin and water |
| L4 730S-32/OSYS | L4 730S-32-TE/OSYS |
|
|
|
|
| L4 760D-32/OSYS | L4 760D-32-TE/OSYS |
|
|
|
Sensors |
|
|
L4 783N-64-TE/OSYS* |
|
|
|
Raman spectroscopy |
|
|
L4 785M-120-TE/OSYS |
|
|
|
. |
| L4 810S-40/OSYS | L4 810S-40-TE/OSYS | 810 +/-5 | 40 | S |
Ophthalmology Dermatology Raman spectroscopy Cancer research |
|
|
L4 810S-115-TE/OSYS | 810 +/-5 | 115 | S | |
| L4 830S-40/OSYS | L4 830S-40-TE/OSYS | 830 +/-10 | 40 | S | |
|
|
L4 830S-115-TE/OSYS | 830 +/-10 | 115 | S | |
|
|
L4 830S-150-TE/OSYS | 830 +/-10 | 150 | S | |
| L4 850S-40/OSYS | L4 850S-40-TE/OSYS | 852 +/-5 | 40 | S | |
|
|
L4 850S-115-TE/OSYS | 852 +/-5 | 115 | S | |
|
|
L4 852D-115-TE/OSYS |
|
|
|
Atomic Clocks Interferometry Raman spectroscopy |
|
|
L4 860D-115-TE/OSYS |
|
|
|
|
| L4 905M-70/OSYS | L4 905M-70-TE/OSYS |
|
|
|
Sensors |
|
|
L4 940M-150-TE/OSYS |
|
|
|
|
|
|
L4 975M-200-TE/OSYS |
|
|
|
Laser pumps, YAG replacement, 980nm also available |
|
|
L4 976D-115-TE/OSYS |
|
|
|
|
|
|
L4 980M-200-TE/OSYS |
|
|
|
|
| L4 1064M-70/OSYS | L4 1064M-70-TE/OSYS | 1064 +/-5 | 70 | M | |
|
|
L4 1064M-150-TE/OSYS |
|
|
|
|
|
|
L4 1060D-115-TE/OSYS |
|
|
|
|
| L4 1310D-3/OSYS | L4 1310D-3-TE/OSYS | 1310 +/-10 | 3 | S | Communications |
| L4 1550D-3/OSYS | L4 1550D-3-TE/OSYS | 1550 +/-10 | 3 | S |
Lepton IV-TE with OEM drivers
Those with a "D" in the part number are DFB or DBR structures
with a built in grating. Those with an "N" have a grating
to stabilize the wavelenth. These lasers are more stable then
the standard Fabry Perot type and have a narrow linewidth (<10MHz).
Standard beam size is approximately 4mm. Optional beam sizes are 1mm, 2mm and 6mm.
* Does not have a photodetector.
Runs only in constant current mode.
** Specifications are not the same as standard Lepton IV OEM
Series. Call for more information.
Ph: 714-898-6001 Fx: 714-897-0979, Email: info@microlaser.com